Surgical Instrument Ultrasonic Cleaner Manufacturer

30L Ultrasonic Cleaner Bath surgical and medical instruments cleaning and disinfecting

AG Ultrasonic Cleaning Systems have been used successfully in the cleaning and maintaining of medical facilities. AG Ultrasonics, equipment can be cleaned quickly and thoroughly .Surgical Instrument Ultrasonic Cleaner Manufacturer  have been proven to eradicate the most resistant bacteria 

Surgical Instrument Ultrasonic Cleaner Manufacturer Conclusions

In every case of testing, the AG Ultrasonic Cleaning Systems and process proved to be extremely effective at reducing the bacterial level of contamination for a wide variety of objects.For both Enterococcus and Escherichia coli, lab results revealed a 100% reduction for every non-porous item tested, a 97% reduction in Enterococcus and a 100% reduction of E. colifor porous items such a microfiber cleaning towel.bacteria were completely eliminated from all contaminated surfaces. The results also conclusively proved that AG Ultrasonic Cleaning Equipment can be used to clean items with substantial bacterial contamination (and this was accomplished without having to frequently change the water in the cleaning tank). Special waste disposal requirements were also not necessary for the wash water after items with bacterial contamination had been cleaned.

Ultrasonic cleaning machine is a simple one step solution which would clean the instruments witin 5-10 minutes of cleaning cycle thereby ensuring the cleanliness and hygiene of the instruments. It only cleans more effectively than manual washing, but also enhances the life of the instruments and helps avoiding cross contaminations.
We have specifically designed our Ultrasonic cleaners to suit the lenght of the laparoscopy instruments and we also custom manufacture the machine as per the size of the instuments to be cleaned.

*Ultrasonic Cleaning machines saves a lot of time
*Save a lot of manual effort
*Helps with achieving same results every time
*Less combursome process
*Save a lot of consumables like water and electricity
*Makes product ready for WD Autoclave in next stage
*Increases shelf life of instruments
*Reduces chances of cross contamination

Steps to cleaning Medical Device with an ultrasonic cleaner
1. Fill chamber with cleaning solvent
2. Note that water must be hot. Ideally, you would use an ultrasonic cleaner with a heater.
3. Run a pre-cleaning cycle
4. Submerge Medical Device into cleaning solvent
5. Run the cleaning cycle
6. After the cycle is complete, remove the items from the parts basket and rinse the solution from the items
7. After rinsing brush the pieces with a soft-bristled brush. Paying special attention to brushing around the claws and crowns that hold the gemstones or diamonds in place.
8. Complete with a final rinse. Place the jewelry in water only and dry with a soft cloth once rinse cycle is complete.