Ultrasonic tank 657L
Inside tank size :L 135x W 64x H76cm
6000W ultrasonic power
120pcs transducer 6KW ultrasonic power
With With secondary
water tank+ pump +filter 100um
Ultrasonic tank size 1000x800x700mm .
Option :With filtration system.
Ultrasonic power :4500W .
Tank capacity :560L
Used : For Engine Block Ultrasonic Cleaning Machine
Frequency :28khz or 40KHZ
Heating power :12KW
2 year warranty.
With 2 set generator control





Ultrasonic tank 657L
Inside tank size :L 135x W 64x H76cm
6000W ultrasonic power
120pcs transducer 6KW ultrasonic power
With With secondary
water tank+ pump +filter 100um
The advantages of the filtration + skimming system:
– saving of detergent and water
– Filter pump with cartridge -> less frequent emptying and much cleaner bath
-Oil skimmer tank -> allows the recycling of oil and heavy grease discharges
The advantages of external frequency generators:
– Easy maintenance
– No risk of water dripping on the remote electronics -> High reliability!
– No transmission of heat from the tank to the electronics, increases service life
– These frequency generators are equipped with a microprocessor allowing a continuous adjustment of the frequency for a better cleaning efficiency. The resonance frequency is thus permanently optimized whatever the temperature of the bath, the water level or the density of the objects.
> The advantages of the AG Sonic design for this Alloy Wheel Paint Stripping ultrasonic cleaner:
– Heating elements immersed in the tank for rapid heating but without loss of useful volume
– a basket which occupies the maximum useful space of the tank. Very strong handles with 4 supports for hoist lifting.
-Casters wheel equipped with brakes and allowing easy movement of the cleaner.
– The external ultrasonic generators are controlled from the control panel located on the front of the tank, all the controls are therefore within easy reach of the operator. The ultrasonic generators can thus be placed in safety on a storage support on the ground (supplied) away from the tank. The ultrasonic generators are thus protected from any accidental dripping of water and are perfectly ventilated.
AG Sonic has been manufacturing ultrasonic parts cleaners for years, providing manufacturers with the highest-quality systems available.
[wpforms id=”13019″]
Why Choose Us



A: Ultrasonic Cleaning is the use of sound waves through water to create microscopic implosions, removing contamination from surfaces, nooks and crannies.
A: The technical process: Ultrasonic energy is introduced into the body of water via transducers.
A: We recommend that you choose the right cleaning agent by the cleaning effect you want to achieve.
A: Most poor cleaning usually results from improper control of one or more process variable(s); such as choosing the wrong detergent solution, insufficient heat, or not allowing enough time for the particular soil to be removed. If you suspect that your ultrasonic cleaner is not cavitating properly, there are two simple tests you can perform: the “glass slide” test and the “foil” test.
A:Rinsing is recommended to remove any chemical residue, which could be harmful to the part. Parts can be rinsed right in your ultrasonic cleaner, using a clean water bath, or in a separate tub containing tap, distilled or deionised water.
A: Heat usually enhances and speeds up the cleaning process, and most detergent solutions are designed to work best at an elevated temperature. The best way to find the optimum temperature, which will give you the fastest, cleanest and safest results, is to run tests. Usually, the best results are within the 50°C to 75°C range.
A: I would definitely recommend, especially the particular unit we have.
A: We did plan originally to get a washer disinfector, but we didn’t think it was worthwhile investment compared to the ultrasonic cleaner.
A:It really speeds up the decontamination process and our staff don’t have hand scrub equipment,.
Contact to our expert get the best solution for your requirements.