30L Ultrasonic Cleaner Medical Instruments Brass Instruments 2 To 4 Minutes

They stand for high-performance, good quality at the best price. ultrasonic frequency of 40 kHz. Ultrasonic bath 30Liter with a basket as an accessory in which even the smallest items can be cleaned.
Tank size :500x300x200mm
·Working volume: approx. 22.9 liters
·500 watt ultrasonic power, 40 kHz frequency
·Strong 600 watts of heating power for a better result
Tank size : 500 x 300 x 200 mm ( L x W x H )
·460 x 270 x 130 mm basket , lid
·Corrosion-resistant stainless steel
·Ideal for industry, workshops and much more
·Highly efficient cleaning at a low price
ultrasonic bath 30 liters
Ultrasonic Frequency : 40,000 Hz
Material: SUS304
Digital Control Timer and heater
Used : 30L Ultrasonic Cleaner

Get Quote Now

Features & Details

Digital Medical Ultrasonic Cleaner

They stand for high-performance, good quality at the best price. ultrasonic frequency of 40 kHz. Ultrasonic bath 30Liter with a basket as an accessory in which even the smallest items can be cleaned.

Our ultrasonic bath gets the full effect from any cleaning concentrate with a high heating power of 600 W. ultrasonic cleaner removes all soiling from even the narrowest areas in the items to be cleaned.

What advantages when cleaning with an ultrasonic bath?

The ultrasonic generator generates high-frequency electrical energy. This is converted into mechanical energy using a piezoelectric oscillating system. The resulting mechanical oscillations are released into the liquid via the bottom of the bath. These tens of millions of bubbles swell and burst. This releases an energy that can already crumble many dirt particles. In addition, there is a hard water jet that blows any dirt down to the smallest recess in the items to be cleaned. Areas that are difficult to access are cleaned extremely efficiently. Since the vesicles are microscopic, they get into the tightest cracks and corners that a rag or brush could never reach.

Ultrasonic Cleaner 30liters advantages

·Robust, durable device thanks to high-quality stainless steel

·Strong 600 W heating power – perfect cleaning result

·Highly efficient cleaning and disinfection

·Gentle cleaning:no damage,longer service life of the items to be cleaned

·Drain valve for clean draining of the water

·Automatic cleaning process, no time-consuming brushing or wiping

·Cleaning of medium-sized to large objects such as laboratory equipment, medical instruments and much more

Our digital series of medical ultrasonic cleaner is eqquiped with LED digital readouts of timer as well as temperature controller. The machines comes with micro-processor based ultrasonic generator which is installed within the cleaning machines thereby saving a lot of space and making it a benchtop cleaning applicaion machines.

Our digital medical ultrasonic cleaner holds upto- 25-30 liers of water capcity and can Clean all types of surgical instuments within 3-5 minutes of applications. The machine is very handy and easy to operate and come with a stainless steel mesh basket. We use SS body for all our machines makes.

Ultrasonic cleaner Specifications:

Parameter

Model	TB-500
Ultrasonic Frequency	40,000 Hz
Material	SUS304
Tank Capacity	30L
Ultrasonic Power	500 W
Heating power	600W strong power, quick heating
Timer	1-30min adjustable
Heater	0-80C adjustable
Unit Size	530 x 325 x 325 mm ( L x W x H )
Tank Size	500 x 300 x 200 mm ( L x W x H )
Package Size	635 x 405 x 390 mm ( L x W x H )
N.W.	14 kg
G.W.	15.6 kg
Power Supply	AC 100 ~ 120V, 50 / 60Hz AC 220 ~ 240V, 50 / 60 Hz

Effective sterilization requires effective Medical Ultrasonic Cleaner and when it comes to cleaning reusable instruments and equipment, our equipment & detergents meets the most demanding criteria. Our industrial ultrasonic cleaners are used to assist with the cleaning of instruments that cannot be adequately cleaned manually such as spiral wound instruments like biopsy forceps etc. The ultrasonic vibration at the frequency used for cleaning does not kill microorganisms and infective aerosols may be produced.Ultrasonic cleaners work by subjecting instruments to high frequency, high-energy sound waves. This causes the soil to be dislodged from instruments and drop to the bottom of the tank, or be sufficiently loosened that it will be removed during the rinsing process. The detergent used in the ultrasonic tank must be carefully selected in accordance with advice from the tank’s manufacturer. Optimally it will be a neutral, low-foaming product and enzymatic cleaners will have enhanced benefits in this process.

How an ultrasonic cleaner works to clean Medical Device
special solvents designed for cleaning Medical Device can be utilized however very good results can also be obtained by using water and an environment friendly low pH cleaning agent. . Ultrasonic cleaners work quickly to completely remove dirt and other contamination through a cavitation process.

Medical Device is cleaned in the same way as other items. Medical Device are submerged into a gentle solvent and the cleaning process sends ultrasonic waves through the solution which creates bubbles that clear away all dirt and grime clinging to the jewelry’s surface. In most cases a short two to three minute cleaning is all that is required for optimum results.

Benefits of cleaning Medical Device with an ultrasonic cleaner
• The process reaches parts of the Medical Device that are extremely difficult to clean with traditional cleaning methods.
Medical Device gets completely clean, leaving it looking brand new.
• Multiple pieces can be cleaned at once, saving time and money. Follow manufacturer recommendations for maximum pieces in your ultrasonic cleaner.
• Gentle cleaning does not damage delicate pieces and allows for cleaning as often as necessary.

Steps to cleaning Medical Device with an ultrasonic cleaner
1. Fill chamber with cleaning solvent
2. Note that water must be hot. Ideally, you would use an ultrasonic cleaner with a heater.
3. Run a pre-cleaning cycle
4. Submerge Medical Device into cleaning solvent
5. Run the cleaning cycle
6. After the cycle is complete, remove the items from the parts basket and rinse the solution from the items
7. After rinsing brush the pieces with a soft-bristled brush. Paying special attention to brushing around the claws and crowns that hold the gemstones or diamonds in place.
8. Complete with a final rinse. Place the jewelry in water only and dry with a soft cloth once rinse cycle is complete.

Customized to your design

AG Sonic has been manufacturing ultrasonic parts cleaners for years, providing manufacturers with the highest-quality systems available.

Warranty:12 months warranty for AG SONIC ultrasonic cleaner.
Lifetime technical support: If any technical problem during warranty time, replacement parts will be sent free of charge.
Raw Material Inspection: We source from top suppliers. QC and engineers rigorously inspect raw materials for quality. Cavitation energy aids dirt removal.
100%Product Inspection: QC checks production. Each unit tests 4+ hours pre – pack; sales send inspection pics.

We Provide high quality products

Why Choose Us

Hight quality
Fashion designs reasonable & competitive price. fast lead time

Professional manufacturer
Professional manufacturer. Welcome to visit our website.

After Sale Service
All products will have been strictly Quality Checked and 2 year warranty,

Frequently Asked Questions

A: Ultrasonic Cleaning is the use of sound waves through water to create microscopic implosions, removing contamination from surfaces, nooks and crannies.

A: The technical process: Ultrasonic energy is introduced into the body of water via transducers.

A: We recommend that you choose the right cleaning agent by the cleaning effect you want to achieve.

A: Most poor cleaning usually results from improper control of one or more process variable(s); such as choosing the wrong detergent solution, insufficient heat, or not allowing enough time for the particular soil to be removed. If you suspect that your ultrasonic cleaner is not cavitating properly, there are two simple tests you can perform: the “glass slide” test and the “foil” test.

A:Rinsing is recommended to remove any chemical residue, which could be harmful to the part. Parts can be rinsed right in your ultrasonic cleaner, using a clean water bath, or in a separate tub containing tap, distilled or deionised water.

A: Heat usually enhances and speeds up the cleaning process, and most detergent solutions are designed to work best at an elevated temperature. The best way to find the optimum temperature, which will give you the fastest, cleanest and safest results, is to run tests. Usually, the best results are within the 50°C to 75°C range.

A: I would definitely recommend, especially the particular unit we have.

A: We did plan originally to get a washer disinfector, but we didn’t think it was worthwhile investment compared to the ultrasonic cleaner.

A:It really speeds up the decontamination process and our staff don’t have hand scrub equipment,.

Request For Quote

Contact to our expert get the best solution for your requirements.

30L Ultrasonic Cleaner Medical Instruments Brass Instruments 2 To 4 Minutes