2L ultrasonic cleaner
Tank size :150x135x100MM
Ultrasonic power:50W
With digital timer and heater
Fully of stainless steel 304
With basket ,lid
For jewelry cleaning , household
The most important parts of the ultrasonic cleaner is tank, transducer and PCB.
1. Tank: AG SONIC uses 1.1mm inner tank which is resist to weak alkali and weak acid.
2. Transducer: AG SONIC bought the imported transducer and made thousands of tests before buying.
3. PCB: Our engineer design and debug the PCB according to the tranducer, so it can match each other well.
2L Digital Ultrasonic Cleaner Specifications:
| Model | TB-50 |
| Ultrasonic Frequency | 40,000 Hz |
| Material | SUS304 |
| Tank Capacity | 2L |
| Ultrasonic Power | 60 W |
| Heating power | 150W strong power, quick heating |
| Timer | 1-30min adjustable |
| Heater | 0-80C adjustable |
| Unit Size | 175 x 160 x 210 mm ( L x W x H ) |
| Tank Size | 150 x 135 x 100 mm ( L x W x H ) |
| Package Size | 250 x 230 x 315 mm ( L x W x H ) |
| N.W. | 2.2 kg |
| G.W. | 2.7 kg |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz AC 220 ~ 240V, 50 / 60 Hz |
Benefits of cleaning jewelry with an ultrasonic cleaner
The process reaches parts of the jewelry that are extremely difficult to clean with traditional cleaning methods.
Jewelry gets completely clean, leaving it looking brand new.
No need to disassemble the jewelry.
Multiple pieces can be cleaned at once, saving time and money. Follow manufacturer recommendations for maximum pieces in your ultrasonic cleaner.
Gentle cleaning does not damage delicate pieces and allows for cleaning as often as necessary.
AG Sonic has been manufacturing ultrasonic parts cleaners for years, providing manufacturers with the highest-quality systems available.
[wpforms id=”13019″]
Why Choose Us
A: Ultrasonic Cleaning is the use of sound waves through water to create microscopic implosions, removing contamination from surfaces, nooks and crannies.
A: The technical process: Ultrasonic energy is introduced into the body of water via transducers.
A: We recommend that you choose the right cleaning agent by the cleaning effect you want to achieve.
A: Most poor cleaning usually results from improper control of one or more process variable(s); such as choosing the wrong detergent solution, insufficient heat, or not allowing enough time for the particular soil to be removed. If you suspect that your ultrasonic cleaner is not cavitating properly, there are two simple tests you can perform: the “glass slide” test and the “foil” test.
A:Rinsing is recommended to remove any chemical residue, which could be harmful to the part. Parts can be rinsed right in your ultrasonic cleaner, using a clean water bath, or in a separate tub containing tap, distilled or deionised water.
A: Heat usually enhances and speeds up the cleaning process, and most detergent solutions are designed to work best at an elevated temperature. The best way to find the optimum temperature, which will give you the fastest, cleanest and safest results, is to run tests. Usually, the best results are within the 50°C to 75°C range.
A: I would definitely recommend, especially the particular unit we have.
A: We did plan originally to get a washer disinfector, but we didn’t think it was worthwhile investment compared to the ultrasonic cleaner.
A:It really speeds up the decontamination process and our staff don’t have hand scrub equipment,.
Contact to our expert get the best solution for your requirements.
